TECHNICAL SPECIFICATION

ELECTRONICS

Power: 250 W RMS per channel into 8 Ω
30 W pure class A
1000 W RMS on lower impedance
Sensitivity: 1 V or 2 V RMS
Bandwidth: 0 Hz to 120 KHz, +0/-0.5 dB
Crosstalk: Not related for mono amplifiers
Signal-to-noise ratio: Typically 110 dB
ASA “A” weighted
THD+N: < 0.03%
Input type: XLR balanced
RCA unbalanced
Input impedance: 88 KΩ on balanced input
44 kΩ on unbalanced input
DC filter: Toggle switch allows to cut the DC of incoming signals
Protection: Overheating > +70° C (158° F)
Remote in and out: 1/8″ jacks in and out can trigger the amplifier on or off from a Nagra MPS or a home automation system
 Power cord:  IEC C19 this is not the standard IEC but a larger 20A plug

 

MONITORING

Nagra modulometer, precision measurement tool
Clipping LED
Intensity can be adjusted, from off to full bright

 

GENERAL

Consumption: 1200 W max
less than 1 W in standby and Auto mode
Weight: 56 Kg (123.4 lb) each unit
Size: Width 23.8 x Height  64.4 x Deepness 54.2 cm (9.3 x 25.3 x 21.3″)
Operating range: 90 – 110 V or 110 -132 V or 180 – 264 V a.c.
50 – 60 Hz
Nedavno objavljeno
Kontaktirajte nas!

Trenutno nismo ovdje. Ali možete nam poslati poruku i javit ćemo vam se što prije.

Not readable? Change text. captcha txt